TYPE 503 HIGH PRESSURE WATER COLUMN

The 503 is a high pressure water column manufactured from ASTM A105 carbon steel extrusion The section was designed by Levelstate specifically for the application. The rating is 207 bar @ 370 degrees C and pressure tested to 310 bar @ ambient temperature. The probe seats are machined into the thick wall of the extrusion at custom spacing as determined by the customer. Probes are secured by means of a clamp plate held in place by 4 M10 studs and nuts. Probes are sealed by way of a Metaflex gasket. Probes are staggered odds on one side and evens on the other, this gives the greatest resolutions over smaller distances. The minimum probe spacing is 35mm. Steam and water connection stubs are provided with either socket or butt weld finishes. The connections are sch 160 material and 1 inch standard O/D. The drain connection provided is 1/2 inch O/D standard with either socket or butt weld finish. We can provide alternative sizes as requested. The top of the column incorporates an eye bolt for hanging purposes, but this can be substituted for a vent connection.

WATER COLUMN PRODUCT SHEET       Rated to 207 bar @ 370 Deg C   Clamp plate probe fitting   Probe type 803   A105 carbon steel